Fitting Instructions...
For Larger Decals see bottom of pageEasy Fitting Instructions Step one.
Leave in a warm room for an hour. In cold conditions warm window or panel with hair dryer. Step two. Lay face down on a flat surface and on the back of the decal use a credit card or similar slide it from the center out in all directions Step three. If fitting on the inside of a car window Use some masking tape on the outside of your window as a guide to fit your decal level then you can line up your decal on the inside of the glass perfectly Step four. Peel decal carefully from the White backing paper leaving it on the clear transfer paper Step five. Fit decal using your masking tape as a guide to line it perfectly Step six. Using a credit card or similar slide it from the center out in all directions Step seven. Carefully remove the clear transfer paper slowly by gently pulling it back on its self to leave the decal in place. Vertical Divider
If Fitting larger decalstry using the hinge method described very well in this YouTube video please follow the link below
|
|
